Skip to main content
Skip table of contents

SYSTEM CONFIGURATION OPTIONS

There are three standard inverter-to-cabinet configurations.

Systems can scale up to 10 Sol-Ark 60K-3P inverters in parallel on the AC bus, supporting up to 600 kW of total inverter output.

When designing larger systems, maintain consistent inverter-to-cabinet ratios across the entire installation. For example, if your system starts with a 1:1 ratio (one inverter per cabinet), all additional inverter-cabinet sets should follow the same 1:1 pattern.

Mixing ratios within the same system (e.g., combining 1:1 and 1:2 configurations) is not supported, as it can lead to imbalanced load sharing.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.