There are three standard inverter-to-cabinet configurations.
-
1 Inverter: 1 Cabinet
One Sol-Ark 3-Phase Inverter, One AES Cabinet -
2 Inverters: 1 Cabinet
Two Sol-Ark 3-Phase Inverters, One AES Cabinet -
1 Inverter: 2 Cabinets
One Sol-Ark 3-Phase Inverter, Two AES Cabinets
Systems can scale up to 10 Sol-Ark 30K/60K-3P inverters in parallel on the AC bus, supporting a total inverter output of up to 300-600 kW.
When designing larger systems, maintain consistent inverter-to-cabinet ratios across the entire installation. For example, if your system starts with a 1:1 ratio (one inverter per cabinet), all additional inverter-cabinet sets should follow the same 1:1 pattern.
|
NOTICE |
|---|
|
UNBALANCED BATTERY HAZARD Mixing ratios within the same system (e.g., combining 1:1 and 1:2 configurations) is not supported, as it can lead to unbalanced load sharing. Failure to follow these instructions may result in equipment damage. |