LYNK II can utilize three power sources, all of which can be used alone or simultaneously. LYNK II will automatically use the highest priority source.
|
Priority |
Source |
|---|---|
|
1 |
13-90 VDC power supply input connected to pin 9 (Vin) and pin 7 (GND) of the 12-pin connector. |
|
2 |
AEbus Port or LYNK Port of enabled batteries. |
|
3 |
USB device (Relays will not function with USB as the only power supply) |
|
NOTE |
|---|
|
AES LiFePO4, AES PROFESSIONAL, AES RACKMOUNT, and HELIOS ESS batteries must be set to ON to supply power and communicate data with LYNK devices. |
AES Cabinet, AES Battery Cabinet, AES PROFESSIONAL, AES RACKMOUNT, HELIOS ESS Batteries
AES Cabinet, AES Battery Cabinet, AES PROFESSIONAL, AES RACKMOUNT, HELIOS ESS, and other Discover lithium batteries supply power to LYNK II using the network cable connected to the LYNK Port.
AES LiFePO4 Batteries
AES LiFePO4 batteries manufactured after Jan 1, 2020, supply power to LYNK II using the LYNK network cable connected to the AEbus Port.
|
NOTE |
|---|
|
AES LiFePO4 batteries manufactured before January 1, 2020 do not supply power to LYNK II using the LYNK network cable connection. An external 13-90 VDC power source connected to the Phoenix 12-pin connector on LYNK II is REQUIRED for the AES LiFePO4 batteries listed below.
|