Compatible Communication Protocols
LYNK ACCESS software for 64-bit Windows 10 / 11 is required to configure LYNK devices for communication with compatible external devices such as inverters, chargers, and motor controllers. Download the current version of LYNK ACCESS software from the Discover Energy Systems website to obtain the most up-to-date suite of available device configurations. An interface guide for Discover Generic Serial CAN is available from the Discover Energy Systems website.
Available Communication Protocol Configurations (Partial List) | |
---|---|
Deye | SUN 3-16K single-phase Hybrid Inverters |
Luxpower | LXP-LB-US 8/10/12K Hybrid Inverter |
Morningstar | GenStar MPPT Controller |
NOARK | 3K - 8K single-phase and 5K - 12K three-phase low-voltage Hybrid Inverter |
SAJ | H2 Series
|
Schneider Electric |
|
Schneider Electric (Legacy) |
|
Selectronic | SP-Pro Series 2i Inverter-Chargers |
Sol-Ark | 5K to 15K-P (Outdoor) and 12K to 15K-2P (Outdoor) |
Sol-Ark - High Voltage | 60K-3P-480V (Outdoor) |
Sol-Ark (Legacy) | 8K - 12K Hybrid Indoor inverters |
Solis | S6-EH2P models (split phase)
|
Solis - High Voltage | S6-EH3P models (three phase)
|
SPE | GREEN Series Industrial Chargers |
Studer Innotec | Xcom-Can Inverter-Chargers and network devices |
SUNSYNK | 3K - 16K single-phase and 8K - 12K three-phase low-voltage Hybrid Inverters |
Victron Energy |
|
RV-C | Various brands of inverter-charger and monitoring devices |
CANopen | Refer to the Discover CANopen Interface Guide |