Skip to main content
Skip table of contents

ROUTINE INSPECTION

caution.png

ELECTRIC SHOCK HAZARD

  • Do not touch the energized surfaces of any electrical component in the battery system.

  • Before servicing the battery, follow all procedures to fully de-energize the battery system.

  • Follow Safe Handling Procedures when working with the battery.

Failure to follow these instructions may result in injury.

Inspect the battery every six months:

  1. Ensure that all DC cables are secure and fasteners are torqued properly.

  2. Inspect and clean network and battery connectors of dirt and debris.

  3. Ensure all networking cables and connectors are secure and tight.

  4. Ensure that the installation location is clean and free from debris.

  5. Inspect for cracks or bulging in the battery case.

  6. Replace any damaged batteries.

  7. Replace any damaged cables.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close