Skip to main content
Skip table of contents

Environmental Specifications

AES Cabinet Environmental Specifications

Specification

CAB-106 / CAB-160 / CAB-210 / CAB-266 / CAB-318 / CAB-372 / CAB-426

Environmental Category

Outdoor (IP55 / NEMA 3R)

Rated Altitude

An altitude of up to 2,000 m (6,561 ft). Elevations greater do not significantly affect operating characteristics.

Charge Temperature

-30°C to 55°C (-22°F to 131°F)

Discharge Temperature

-30°C to 55°C (-22°F to 131°F)

Storage Temperature (a)(b)

-20°C to 45°C (- 4°F to 113°F)

Acoustic Noise at 1 m

≤75 dB

Relative Humidity

<95% (Non-condensing humidity)

(a) Storage outside of specified temperatures will result in permanent capacity loss and void the warranty.
(b) "Storage" refers to periods without Auxiliary AC Power with an active Thermal Management System.

NOTICE

BATTERY CABINET CORROSION

  • Installing the battery cabinet in environments that are dusty or have corrosive elements, such as salt water or chemicals, may increase the wear on components. If this is your installation environment, increase the cadence of maintenance checks, including cleaning and inspections.

  • Repaint, repair, or replace corroded components immediately.

Failure to follow this instruction may result in equipment damage.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.