Appendix 8. System Operating Parameters Information
NOTE |
|---|
The following data can be accessed by the read function code |
Processor Register Address | Data Type | Data Content | Data | Comment |
|---|---|---|---|---|
50301 | UINT16 | Starting passive equalization – starting differential Voltage value | mV | |
50302 | UINT16 | Minimum cell voltage value to initiate passive equalization | mV | |
50303 | UINT16 | Fan On Temperature | °C, +40 | Real data +40 when sent by BMS |
50304 | UINT16 | Fan Off Temperature | °C, +40 | Real data +40 when sent by BMS |
50305 | UINT16 | Fan Unit Voltage | mV | |
50306 | UINT16 | Maximum allowable current for single pack charging | 0.1 A | |
50307 | UINT16 | Minimum allowable current for single pack charging | 0.1 A | |
50308 | UINT16 | Charge current reduction voltage | mV | |
50309 | UINT16 | Charge stop cell voltage value | mV | |
50310 | UINT16 | Maximum allowable current for single pack discharge | 0.1 A | |
50311 | UINT16 | Minimum allowable current for single pack discharge | 0.1 A | |
50312 | UINT16 | Discharge reduction cell voltage | mV | |
50313 | UINT16 | Discharge stop cell voltage | mV | |
50314 | UINT16 | Pre-charge voltage | 0.1 V | |
50315 | UINT16 | Pack accumulation of total voltage differential alarm values | 0.1 V | |
50316 | UINT16 | Cooling setting temperature | °C | |
50317 | UINT16 | Cooling start temperature | °C | |
50318 | UINT16 | Cooling stop temperature | °C | |
50319 | UINT16 | Heating setting temperature | °C | |
50320 | UINT16 | Heating start temperature | °C | |
50321 | UINT16 | Heating stop temperature | °C | |
50322 | UINT16 | Self-circulating minimum temperature | °C | |
50323 | UINT16 | Self-circulating maximum temperature | °C | |
50324 | UINT16 | Self-circulating start temperature difference | °C | |
50325 | UINT16 | Self-circulating stop temperature difference | °C | |
50326 | UINT16 | Dehumidifier - Humidity start value | % | |
50327 | UINT16 | Dehumidifier - Humidity stop value | % | |
50328 | UINT16 | Dehumidifier - Heating start value | °C | |
50329 | UINT16 | IP_Addr1_1 | Changes to the IP address are applied after restarting | |
50330 | UINT16 | IP_Addr1_2 | ||
50331 | UINT16 | IP_Addr1_3 | ||
50332 | UINT16 | IP_Addr1_4 | ||
50333 | UINT16 | IP_Addr2_1 | ||
50334 | UINT16 | IP_Addr2_2 | ||
50335 | UINT16 | IP_Addr2_3 | ||
50336 | UINT16 | IP_Addr2_4 | ||
50337 | UINT16 | Enable EMS Communication Fault | ||
50338 | UINT16 | EMS Communication Timeout | seconds | 60 seconds |