Battery ON/OFF Key
To turn ON the battery, first switch the breaker to the ON (closed) position.
Briefly press the battery’s ON/OFF key to switch the battery ON. The LED lights up orange.
To turn OFF the battery, briefly press the ON/OFF key. The LED turns OFF.
If desired, switch the breaker to the OFF (open) position.
NOTICE |
|---|
BREAKER AND BMS HAZARD The breaker and the BMS are independent. Setting the breaker to the ON (Closed) position does not switch the BMS ON. Setting the breaker to the OFF (Open) position does not switch the BMS OFF. Independently set the BMS ON or OFF with the ON/OFF key. Failure to follow these instructions may result in equipment damage. |
Battery ON/OFF Key LED States
LED | Description |
|---|---|
Off | Battery is OFF. |
On | Battery is ON. |
Pulse | Battery is warning of an approaching protection limit. |
Flash | Either the battery breaker is open or the battery has faulted. Use LYNK Access software to identify and diagnose the issue. |
Double-flash | Battery is identifying itself after the Identify command was issued from LYNK Access software. |