HELIOS ESS Closed-Loop Communication - Supported Inverters
NOTE |
|---|
If the inverter-charger you are connecting to the HELIOS ESS battery is not listed here, you may alternatively use the LYNK II Gateway for managed (closed-loop) communication. Otherwise, managed (closed-loop) communication may not be supported with your particular device. However, you can connect the inverter-charger to HELIOS ESS batteries in a self-managed (open-loop) configuration.
|
The HELIOS ESS battery supports closed-loop communication using two different methods:
Direct (without LYNK II Gateway) using the Pylon protocol.
LYNK II Gateway.
The following table identifies the closed-loop communication methods available to supported inverter-chargers.
Closed-Loop Communication with Inverters
Inverter | Closed Loop Without LYNK II (LV-BMS) | Closed Loop with LYNK II | LYNK ACCESS with LYNK II | LYNK CLOUD with LYNK II | |
|---|---|---|---|---|---|
Straight Cable | Create Your Own Cable | ||||
Deye | Yes | No | Yes | Yes | Yes |
GROWATT | Yes | No | Yes | Yes | Yes |
Luxpower | Yes | No | Yes | Yes | Yes |
NOARK | Yes | No | Yes | Yes | Yes |
Schneider Electric | No | Yes | Yes | Yes | |
Schneider Electric | No | Yes | Yes | Yes | |
Sol-Ark (Outdoor) | Yes | No | Yes | Yes | Yes |
Sol-Ark (Legacy) | No | Yes | Yes | Yes | Yes |
Solis | Yes | No | Yes | Yes | Yes |
SUNSYNK | Yes | No | Yes | Yes | Yes |
Victron Energy | No | Yes | Yes | Yes | Yes |